Lowering kit for Milwaukee-Eight
130-30

€299.00 *
Content: 1 Set

Prices incl. VAT plus shipping costs

Ready to ship today,
Delivery time appr. 1-3 workdays

Motorcycle:

Product information "Lowering kit for Milwaukee-Eight"

Lowering device for Harley-Davidson Milwaukee-Eight - FROM NOW WITH ABE!

NEW: From now on the registration of the lowering device is not necessary. Because the Müller lowering device for Milwaukee Eight models is NOW INCLUDED ABE (general operating permit)!!! A small document that simply has to be carried. This saves costs, time and nerves!

The Müller lowering kit for Milwaukee Eight models is the logical development of our well-known lowering systems for EVO and Twin Cam. The conversion kit offers stepless lowering by up to 40mm (with Fat Bob only max. 25mm). The height can be adjusted individually and also ensures excellent ride comfort. No shortening of the threaded rod is necessary and also the needle bearing does not have to be pressed over, because our kit is supplied including bearing. A part for eternity, as maintenance-free and made of the highest quality materials.

Advantages of the Müller lowering kit for HD Milwaukee-Eight models:

  • stepless lowering by up to 40mm (Fat Bob only max. 25mm)
  • maintenance-free and durable, as made of the highest quality materials
  • no repressing of the original needle bearing necessary, since these are already supplied with bearing
  • Assembly without shortening the threaded rod
  • Utility model protected
  • NEW: incl. ABE


MP1 (130-30):

      • F(L)XBR(S) Breakout
      • FXDR 114 Softail
      • FLDE Deluxe 
      • FLFB(S) Fat Boy
      • FXBS / FXFB(S) Fat Bob (only up to 25mm)
      • FLSB Sport Glide
      • FLHC(S) Heritage Classic
      • FXLRS Low Rider S
      • FXLRST Low Rider ST (only up to 25mm)
      • FXRST Low Rider El Diablo


MP2 (130-40):

      • FXBB(S) Street Bob
      • FXLR Low Rider
      • FLSL Softail Slim
      • FXST Softail Standard

Tip If you are unsure which variant fits your bike: if your Harley has a possibility to adjust the spring stiffness (sits under the oil tank on the right side), then you need the variant MP1. In all other cases MP2. See also the graphic in the pictures! Always provided of course that it is a Milwaukee Eight engine. For Evo or Twin Cam engine we have these lowerers in our program.

Note for the installation of the M8 lowerers: For the installation a strut press / workshop press is required, so the installation should be done by an appropriate workshop. Müller lowerers are also available at Harley and Customizing dealers!
For workshops we offer our strut press. This press is designed for the installation of lowerers on M8 models and can also be used for the installation of Evo and Twin Cam lowerers with the help of this adapter.

Related links to "Lowering kit for Milwaukee-Eight"
Read, write and discuss reviews... more
Customer evaluation for "Lowering kit for Milwaukee-Eight"
6 Jun 2020

Endlich wieder ein Fahrwerk!

Auch ich hatte vorher eine Tieferlegung von TB verbaut. 30mm tiefer mit kürzen der Kolbenstange. Das Fahren war wie mit Starrrahmen. Super hart und in Kurven fast schon gefährlich. Ich hab mich nach langem Überlegen und viel Informieren nun doch für einen neuen gebrauchten Stoßdämpfer und Müller-System entschieden. Obwohl mir alle möglichen Händler abgeraten haben weil das würde nicht besser werden als das was ich schon habe, habe ich trotzdem den Versuch gewagt. Und siehe da! Ich habe wieder ein Fahrwerk! Endlich federt das Motorrad hinten wieder ein wenn ich mich raufsetze und endlich tut nicht jede Fahrbahnmarkierung mehr weh im Rücken. Ich kann hier nur 100% Empfehlung aussprechen. Tieferlegen mit Federkomfort ist also doch möglich! Einziges Manko vielleicht: Das erneute Zerlegen ist nicht unbedingt einfach.

Ich bin endlich happy!!!

3 Jun 2020

Absolut Geniales Tieferlegungskit FXLR

Das Tieferlegungskit bringen bei der 2020 LowRider S ganze 38 mm. Da die LowRider unten etwas breiter ist, komme ich nun mit den fast 4 cm westentlich besser und sicherer am Boden und nicht mehr so nah am Auspuff. Einfach Genial!!! Super schnell eingebaut - Wer diese paar cm will oder braucht MUSS das unbedingt haben! Lässt sich damit noch besser fahren als vorher!

31 Mar 2020

Passt

35mm tiefer gelegt, super Optik und Fahrverhalten. Top

21 Aug 2019

Get Low

Funktioniert super, auch die Einstellung der Härte über das Handrat kann noch einwandfrei geändert werden.

14 Apr 2019

Super Tieferleger!

Ich hatte vorher den Tieferleger von TB verbaut. Leider war bei diesem kaum noch Federweg vorhanden und somit der Dämpfer extrem hart. Auf der Messe in Bad Salzuflen bin ich dann auf den Müller Tieferleger aufmerksam geworden. Nach langem überlegen habe ich doch noch mal umgerüstet und bin begeistert. Ich habe mein Heck ca. 30mm tiefergelgt und immer noch (für mein Empfinden) ausreichend Federweg. Auch die Verstellung der Härte mittels Handrat funktioniert einwandfrei.

28 Sep 2018

Tieferleger

Hallo, über Zodiac habe ich einen Tieferleger für Milwaukee-Eight gekauft. Welche Tools benötige ich, um die Festplatte zu steuern?

Write an evaluation
Please enter these characters in the following text field.

The fields marked with * are required.